ATE208 nla_menu_1213307549.. discontinued ..

a-m-ate208
a-m-ate208ateonsennheisera-m-atek
Hívjon az árért
5 5 8 Product
5 5 8 Product
+

gyártó: .. discontinued .. .. discontinued ..
termékkód: A80093
nla_ani.gif

Emesser *figure of 8* microphone

Replaced by: ATE308

The ATE 208 Emesser from Ambient Recording is a compact condenser microphone that converts any standard boom mic into an M/S stereo mic system. The Emesser has a Figure-8 pickup pattern and operates on standard 48V phantom power. The mic is designed to deliver an enhanced dynamic range and it has a custom-tailored frequency response that's designed to match the acoustic pattern of a typical boom mic at 90°.

Main Benefits:

  • Compact Design
  • Figure-8 Pickup Pattern
  • 48V Phantom Power
  • Converts any standard boom mic into an M/S stereo mic system
  • Provides seamless transitions between mono and stereo without altering sound characteristics
  • Offers enhanced dynamic range and a custom-tailored frequency response that's designed to match the acoustic pattern of a typical boom mic at 90°
  • Standard TA3M output

Overview

Clip-on “figure-of-eight”

The Emesser (ATE208) is a very small “figure-of-eight” microphone intended to convert any boom mike on the fly into a M/ S stereo system. Featuring a high quality real condenser powered on 48V phantom, it delivers an enhanced dynamic range required for critical recordings. The Emesser Set (ATE208Set) comes complete with mounting clip (ATEC-R) and Y-loom (ATEK), which outputs both M and S signals in a standard balanced 5-pin XLR in applied box (ATE-Box). Including all the necessary accessories and allowing continued use of the existing shotgun mike, suspension and windshield it offers a very economic solution for those who don’t want to part with their favored shotgun to go stereo.

Due to the M/S technology and the same mike being used for dialogue and ambience recordings seamless transitions between mono and stereo are feasible without alteration of the sound characteristics. The frequency response therefore was custom-tailored to match the acoustic pattern of typical boom mikes at 90° with the characteristic, distinct bass roll-off.
The result is a distinguished stereo perception with pronounced presence and minimal negative phase correlation at the low end with exceptional good suppression of handling noise.

Note: This item includes the microphone only. Accessories for mounting and connection are available separately.

Legutóbb megtekintett:

XL-H4
2017-03-23 14:18
XL-H4 The Sound Devices XL-H4 Power Adaptor Cable connects a power adaptor with a 4-pin XLR-M connector to a device which has a 4-pin Hirose connecti
ACN-LS csapó
2017-04-12 16:53
Lockit TC csapó Gen/Read ACN compatible w/ bag Replaced by: ACN-LS2 Az ACN-LS csapó az Ambient Recording-tól egy moduláris time code csapó és
ACN-TL-T
2017-04-12 16:53
Leather Pouch f. ACN-TL TinyLockit The ACN-TL-T Pouch for Ambient Tiny Lockit by Ambient Recording is a leather pouch with a transparent foil window.
QXSCS-65
2017-04-12 16:53
Straight cable kit for QX 565 and QXS 565, stereo XLR5 The QXSCS-65 from Ambient Recording is a cable kit featuring a straight cable, a 5-pin stereo
CL-1
2017-02-22 16:24
Sound Devices CL-1 DISCONTINUEDONLY ONE UNIT LEFT ON STOCK Interface for connecting external keyboards to Sound Devices 7-Series audio recorders. Als
Modular Windshield WS 9 Kit (no CB)
2020-06-11 13:39
Product Code: 086017 The Modular Windshield WS 9 kit is suitable for use with compact condenser mics when used with remote or active cables such as
InVision INV-6
2020-06-11 13:39
Termékkód: 041106 Az INV-6 rövid, 19-25mm átmérőjű, kismembrános kondenzátor mikrofonokhoz alkalmazható, mint pl. a Sennheiser MKH 8020/40
Studer 41.04.0102 Kugellager
2018-02-22 12:20
Studer 41.04.0102 Kugellager
ACN-LSB
2024-02-24 22:35
Soft Case for ACN-LS TC Slate The ACN-LSB bag protects the slate against shocks, rain and dirt. With a rigid, sewn-in framework, this bag can withsta
keyboard_arrow_up